X- Valve

The X-Valve is the second generation ReTro Valve. Lightweight aluminum construction, hyperfast recharging integrated regulator, Reactive Trigger technology, and the Lvl 10 are all standard equipment, making this our most popular upgrade! The X-Valve's regulator fully recharges in less than .04 seconds, which means this: Shootdown is a thing of the past. The hyperfast recharge rate allows the X-Valve to fire at 26+ times per second without shootdown, faster than anyone can pull the trigger. The regulator also maintains consistent pressures inside the valve. This in turn gives you consistent velocities which allows tighter shot groupings. The Reactive Trigger actually pushes your finger back after firing each shot, enabling you to easily reach much higher rates of fire as compared to the standard 'Mag valve. Shootdown is gone forever and the gas flows into the chamber so fast you can feel the valve heat up after a long string. Comes with everything you see here and is a direct replacement for the standard Mag valve. Slide it right in and go to town!

Comes standard with LvL10 upgrade!!!!!!!!!!!!!!!!!!!!

1. Warning: The X-Valve will not fit into an Automag RT. (It WILL fit an RT Pro.) If you have an RT, please do NOT order an X-Valve.

    

2. The X-valve will only run on compressed air or Nitrogen - not CO2.

    

3. If you have a Hopper Left Minimag with the original short (4") hose, you will need a reverse X-Valve. These are not available yet - we expect them in 3-4 weeks.

    

4. If you are going to use the X-Valve in an RT Pro or Emag, KEEP YOUR ON/OFF ASSEMBLY. The assembly provided with the valve kit will have the wrong size on/off pin for your marker.

Convert your Automag or Minimag into a Super Semi
Features the Reactive Trigger technology of the Automag RT!
No machining necessary.
Remove your old valve, slip in the new valve, and shoot!
A completely new valve assembly for the 68 Automag Package includes:

• Complete X-valve assembly

• All aluminum

• Reactive trigger performance

• Zero drop-off performance

• Sear assembly

• Level 10 kit