Designs Releases the Ultra Light Engineering Trigger
IL – August 25, 2003 – Engineering.
It’s what Airgun Designs (AGD) has been known for
throughout its history. The latest product to come out
of AGD’s think tank is the ULE Trigger
Pull Kit (Ultra Light Trigger/ULT for
short), part of AGD’s
Ultra Light Engineering product line.
ULT isn’t some big add-on contraption or even
a new trigger frame. The ULT is a newly designed on/off
assembly. Simply take out your old on/off assembly and
replace it with the ULT. Presto-change-o! Your trigger
pull drops by 2 pounds! The new trigger pull weighs in
at a mere 15 ounces. That’s near-electronic trigger
lightness with the reliability of all-mechanical operation.
No need to worry about when your battery is going to
die, no worries about getting electronic parts wet. The ULT just keeps on working.
the ULE Trigger Pull Kit with the Lvl
10 Low Impact Bolt system on your mechanical
AGD marker and
you’ll have a marker with a trigger that is nearly ‘electronic
light’ and a proven mechanical anti-chop system.
Nowhere else can you get these features without batteries
and electronics. Who says you need batteries in your
Trigger Pull Kit is best utilized in an AGD
marker powered by a valve based on our Reactive Trigger
technology. The ULT is a drop in upgrade for the X-Valve
and the newer RT Pros (those equipped with an all black
valve). The ULT is compatible with Automags, MiniMags,
E-Mags, or X-Mags. However, installation and use of the
ULT with these markers is not recommended. To achieve
maximum trigger lightness, it is recommended that the
ULT be used in conjunction with a Lvl 10.
Owners of older valves/markers, such as the Automag
RT, RT Pros with the half steel/half aluminum valves,
and ReTro Valves are not out of luck. While these valves
are not compatible as they now exist, they can be milled
in order to make them compatible with the ULE
Trigger Pull Kit. Brad Nestle, an Authorized AGD Factory Technician,
can mill out your older valve for a minimal charge. Brad
can be contacted at Paintball Maxx (http://www.paintballmaxx.com)
in Houston, Texas.
features, combined with Airgun Designs’ legendary
reliability and customer service, make the new ULE
Trigger Pull Kit a great new way to customize your AGD marker.
The ULE Trigger Pull Kit, with a MSRP of $47 US, is available
from your local paintball shop or from AGD directly.
The ULE Trigger Pull Kit is the creation of Airgun Designs,
a company that has brought many innovations to the paintball
industry since its founding in 1988. These innovations
include the Power Feed, Reactive Triggers, and the Warp
Feed. Also, compressed air and fiber wrapped tanks, a
common sight at paintball fields the World over, were
first introduced to the paintball industry by Airgun
Designs back in 1991.
Interested in learning more about current and upcoming
Airgun Designs products? Please visit us at http://www.airgun.com and at http://www.automags.org. Automags.org is the
Official Automags Owners Group. This site is owned
and operated by Airgun Designs, and provides a place
where paintball fanatics can come together and interact.