Warp Feed
Airgun Designs - Warp Feed Pictures!
Introducing the Airgun Designs
Warp Feed!

E-Mag with Warp Feed

AGD congratulates Team Dixie Reign for winning with the Warp Feed! Here's what they had to say:

There were several questions asked about the warp feed systems by ourselves and the other 18 teams in the tournament. We were the only team using the warp feeds and got asked about the performance of them all day. However, after 11 games on the air ball field and 4 games on the hyper ball field, we lost 4 games on air ball and none on hyper ball. Out of 15 games, we had zero hopper hits. Never once did our guns skip or break paint even while we were running and shooting. Finally, all questions were answered as we received our first place trophy the first time out using the warp feed. We have to give credit where credit is due, and the warp feed definitely contributed to our success.
Thanks, Airgun
Jason, Team Dixie Reign

Team Dixie Reign members show off their banner and trophy - won with the Warp Feed!


Click on thumbnails below for larger images (except last picture)
At right: Warp Feed in smoke.
Below, left to right:
Red, blue, clear Warp Feeds.
Warp feed in smoke
 
 
Warp feed in red Warp feed in blue Warp feed in clear
Warps currently come stock in these colors. Other colors and fades are sometimes available by special order.

Ball wedged in drive wheel
Balls flowing to output port
Inside View
Inside view of electronics and gear reduction pulley
Urethane disks
Urethane disks grip balls from the side but slip if ball flow stops

Diverter Plate
Close-up of diverter plate that removes balls from wheel and guides them into the exit port
Warp Feed Motor Ball wedged in drive wheel
Close-up of ball being wedged into drive wheel

Disassembled wheel
Wheel can be completely disassembled for cleaning
Warp Feed Circuit Board Reduction pulley and gear
Reduction pulley and gear

Flexible Feed Tube
Above: Flexible feed tube can be cut to length.
 

Back to E-Mag Page

Back to Warp Feed FAQs

 

For technical help visit http://www.AutoMags.org and post any questions or comments you might have in the forums. Your questions will be answered by Airgun Designs Master Techs and fellow Mag shooters.
 

Home ]  [ Products ]  [ Spare Parts ]  [ About AGD ]  [ Contact ]  [ Airgun Europe ]
Online Store ]  [ Tech Support ]  [ Dealer Directory ]  [ About Paintball ]  [ Request Repair Authorization ]
Airgun Designs USA
401 Florine Court, Cary, IL 60013
Hours: Monday to Thursday 9:00 a.m. - 5:00 p.m. (Central Time)
Office Tel: 847-520-7507 • Office Fax: 847-520-7848 • Alternate Fax: 847-446-8655
Tech Support Hours: Monday to Thursday 9:00 am to 5:00 pm (Central Time)
Tech Support Tel: 847-520-7225 • Tech Support Email: romanr@airgun.com