Home Safety Handling Precautions Welcome Quick Start General Description Technical Specifications Operating Modes Programming Maintenance Cleaning Lubrication Marker O–Rings Valve Level 10 Bolt Grip Frame Battery PC Board ACE Board Electronic Wiring Parts Identification Troubleshooting Recommended Options Warranty Service & Shipping Contact Information Lots of Xtras!!!

Keeping your X-mag clean and well lubricated will ensure years of faithful service. How often you maintain your marker should be based on playing conditions, frequency of play, and environment. Sand and dusty environments are harsh on o–rings and moving parts; playing at facilities near the coast can allow salt in the air to attack metal parts such as screws. Pay attention to your environment and how it can affect your playing equipment and create a maintenance schedule accordingly. Under normal operating conditions we recommend that you clean your marker after each day of play and lubricate it about once a month. Always remember to wear approved paintball goggles and mask when cleaning your paintball marker if the marker is pressurized. After each use a paintball marker should be field stripped and all the exposed parts cleaned and inspected for wear or problems. Lightly lubricate all surfaces and reassemble according to instructions. DO NOT USE “CLEANING” LUBRICANTS FOR FIREARMS OR SPRAYS SUCH AS “WD-40”. Lubricate with quality lubricants designed for pneumatic devices such as “Autolube.” If used regularly, we find that customers who properly lubricate their paintball markers once a week have the fewest problems. To lubricate your X-mag, apply 6 drops of AUTOLUBE into the air line running into the valve. Then gas up and dry fire the paintball marker several dozen times with the barrel removed to prevent oil build-up in the barrel. This cycles the oil throughout the marker and provides needed lubrication to internal parts.