|
|
|
PAINTBALLS
|
|
There are many
different kinds of paintballs on the market, all with different
specifications. The one thing that is consistent is that low quality
paintballs will perform poorly in the X-mag. Always use fresh, high-quality paintballs and
try many different types to find the best one suited to your paintball
marker and playing conditions.
|
|
LOADER
|
|
An agitator loader
such as a VL Revolution or HALO is mandatory for the efficient and
effective use of your X-mag. Always keep at least twenty balls in the
loader when fast firing. In order to assure the optimal feed rates and
minimize ball chopping, we recommend the use of the Airgun Designs Warp
Feed friction drive system. The Warp Feed system will consistently feed
at a rate equal to the maximum firing rate of the X-mag.
Ball breakage may occur with the X-mag due to the incredibly high rates
of fire achievable. If you find that the balls are cut in half in the
breech, consider the purchase of a positive feed loader system combining
an agitator with a Warp Feed. You can also reduce ball breakage by
reducing the set rate of fire in Electronic mode.
|
|
BARREL BAGS/SOCKS
|
|
The ability to make
the electronic trigger so sensitive means that if the trigger is accidentally
bumped while the marker is live it can shoot multiple paintballs. The
traditional barrel plug is great at preventing one paintball from exiting
the barrel, but not multiples. We strongly recommend that you purchase a
good barrel bag that will stop this occurring. The barrel bag should have
a reinforced end.
|
|
ACCESSORIES
|
|
Airgun Designs has a
variety of add–on products for your paintball marker, including
left, right and center feed models, Warp feed, and complete air systems.
Airgun Designs also carries hats, t-shirts, patches, gun cases, and other
promotional items. Visit http://store.airgun.com
to see our latest paintball
products and accessories .
|
|
